摘要：X. ZHU, L. WANG, W. CUI, B. HUANG, Y. WU, M. JIA, Y. ZHAO, B. ZHENG, J. LI, D. ZHOU and D. YU

《Chinese Journal of Aeronautics》

Volume 38, No.4, April 2025

CONTENTS

本期共发表38篇航空航天相关论文，具体栏目及篇数如下：

Fast Track

Stable control under frequency aliasing between rigid and flexible characteristics

Z. SONG, W. DING and C. WEI

Views & Comments

Challenges and suggestions for high-speed boundary layer transition control using surface microstructure

J. YUAN, S. YU and Z. QIAN

Fluid Mechanics and Flight Mechanics

Pressure oscillation and suppression method of large-aspect-ratio solid rocket motors

Y. XI, J. GAO, Z. WU, B. ZHANG, L. YANG and J. XIA

Effects of pressure oscillations on impinging-jet atomization and spray combustion in liquid rocket engines

Z. PENG, B. ZHONG, X. CHEN and L. LI

Stall prediction model based on deep learning network in axial flow compressor

Y. DENG, J. LI, J. LIU, F. PENG, H. ZHANG and M.P. SCHOEN

A collisional-radiative model for atmospheric-pressure low-temperature air discharges

X. ZHU, L. WANG, W. CUI, B. HUANG, Y. WU, M. JIA, Y. ZHAO, B. ZHENG, J. LI, D. ZHOU and D. YU

Measurement of aerodynamic heating of micro-scale rotational shearing flow and its heat flux identification

Y. LIU, Y. LYU, J. ZHANG, C. LI, J. ZHANG and Z. HUANG

Implicit geometry neural network for mesh generation

R. XU, H. LYU, J. YU, C. BAO, H. WANG, Y. LIU and X. LIU

Laser ablation ignition modes in a cavity-based supersonic combustor

J. JI, Z. CAI, T. WANG, Y. TIAN, M. SUN, J. ZHU and Z. WANG

Aero-propulsive coupling performance and design of distributed propulsion wing

K. WANG and Z. ZHOU

Characteristics of hypersonic inward turning detonation wave

H. XIONG, R. QIU, T. ZHANG, H. YAN and Y. YOU

Influence of geometric parameters on aerodynamic characteristics of serpentine convergent-divergent nozzle

X. WEI, X. SHI and H. JI

Solid Mechanics and Vehicle Conceptual Design

Sequential search-based Latin hypercube sampling scheme for digital twin uncertainty quantification with application in EHA

D. LIU, S. WANG, J. SHI and D. LIU

Wake vortex safety assessment during cruise using a regional medium-short-range turbofan aircraft as an example

W. PAN, L. DENG, Y. LENG and F. LI

Effect of leading-edge and trailing-edge camber morphing on gust load for an elastic wing

Y. DAI, Y. HU, Y. WU, C. SONG and C. YANG

Output power prediction of stratospheric airship solar array based on surrogate model under global wind field

K. SUN, S. LIU, Y. GAO, H. DU, D. CHENG and Z. WANG

Experimental investigation of dynamic characteristic during civil aircraft ditching

W. LUO, W. GU, Y. HUANG and L. CHANG

An embedded piezoelectric actuator for active vibration control: Concept, modeling, simulation, and investigation

R. QI, L. WANG, J. JIN, L. YUAN, Z. SHEN and Y. GE

Aerodynamic configuration of a wide-range reversible vehicle

Y. SUN, S. LUO, J. LIU and J. TIAN

Wave-based approaches for wavespace of highly contrasted structures with viscoelastic damping

D. CUI, M. ICHCHOU, N. ATALLA and A.-M. ZINE

A fast calculation method for three-impulse contingency return trajectory during the near-moon phase based on differential algebra

L. LU, H. LI, T. DONG and W. ZHOU

Fatigue reliability assessment of turbine blade via direct probability integral method

G. CHEN, P. GAO, H. LI and D. YANG

Fatigue damage origin of laser direct energy deposited titanium alloy: Competition and combination of gas pore and microstructure

J. CAO, X. KONG, Y. ZHU, S. ZHANG and J. ZHANG

Vibration reduction mechanism and characteristics evaluation of active elastic support/dry friction damper

S. WANG, D. LIN, Q. LI, J. CHEN and Y. LIU

Electronics and Electrical Engineering and Control

Highly constrained cooperative guidance for flexible landing on asteroids (Cover article)

C. LYU, Z. LIANG and S. ZHU

Information mining and mechanical analysis of new-generation aero-engine turbine discs with industrial computed laminography reverse engineering

Y. GAO

Intelligent sequential multi-impulse collision avoidance method for non-cooperative spacecraft based on an improved search tree algorithm

X. CAO, X. NING, Z. WANG, S. LIU, F. CHENG, W. LI and X. LIAN

Endo-atmospheric maneuver penetration strategy based on generative adversarial reinforcement learning

Y. HUI, X. LI, C. LIANG, J. SUN and Z. DU

Impact speed and angle constrained guidance law for unpowered gliding vehicle

X. KONG, C. ZHANG and F. XIONG

Flexible prescribed performance-based approaching control for UAV aerial recovery under multiwind disturbances

Y. WANG, H. WANG, J. ZHU, Y. LIU, M. ZHANG and Z. SU

Adaptive terminal sliding combined super twisting control design and flight tests for automatic carrier landing system

Z. YAO, D. LI, Z. KAN and J. XIANG

Parameterized evasion strategy for hypersonic glide vehicles against two missiles based on reinforcement learning

Z. HAO, R. ZHANG and H. LI

Non-cooperative target recognition and relative motion estimation with inertial measurement unit assistance

X. ZHAO, S. WANG, C. ZHANG, S. ZHANG and Y. ZHAO

Robust pre-departure scheduling for a nation-wide air traffic flow management

J. YAN, H. HU, Y. WANG, X. MA, M. HU, D. DELAHAYE and S. ALAM

A dynamic spectrum and power allocation method for co-located pulse radar and communication system coexistence

Y. MENG, Y. LI, S. CAI and D. SU

Material Engineering and Mechanical Manufacturing

Digital element approach based automated conformal mesh generation methodology for meso-scale modeling of realistic textile composites and progressive failure analysis under compressive load

Y. MA, L. HU, S. LU, C. DENG, X. CHEN and X. ZENG

Machinability improvement of titanium alloy in face grinding by ultrasonic assisted jet plasma oxidation

H. WU, X. YE, Z. LIAO, S. LI, C. XIAO, J. ZENG, S. ZHANG and Y. WU

Trajectory control strategy for multi-tool synchronous electrochemical machining of blisk channels

S. DUAN, J. LIU, B. TANG, X. ZHAN and D. ZHU

来源：科创中国一点号