畅享聊：SolidWorks学习（48）

摘要：分享兴趣，传播快乐，增长见闻，留下美好！亲爱的您，这里是LearningYard新学苑。今天小编为你带来畅享聊：SolidWorks学习（48）欢迎您的访问！Share interests, spread happiness, increase knowled

分享兴趣，传播快乐，增长见闻，留下美好！

亲爱的您，这里是LearningYard新学苑。

今天小编为你带来

畅享聊：SolidWorks学习（48）

欢迎您的访问！

Share interests, spread happiness, increase knowledge, and leave beautiful!

Dear you, this is LearningYard Academy.

Today, the editor brings you

Changxiang Chat:SolidWorks Learning (48)

welcome your visit!

本期我们绘制一个支架零件，下面是这个零件的零件图纸。从图纸中可以看出这是个典型的三维图纸，其中尺寸参数标注详细，通过三个视角的图片得以看出这个支架的主体形状，主要分为底座以及底座以上的部分，面对这个零件，我们可以先进行底座的绘制，注意底座的下面是被掏空的，这可以从左下角的图中看出来大致的形状。

In this issue, we are drawing a bracket component. Below is the component drawing for this component. From the drawing, it can be seen that this is a typical 3D drawing, with detailed dimension parameter annotations. The main shape of this bracket can be seen through images from three perspectives, mainly divided into the base and the part above the base. Facing this part, we can first draw the base, paying attention to the fact that the bottom of the base is hollowed out, which can be roughly seen from the bottom left corner of the picture.

我们接着绘制支架的上半部分。首先建立辅助参考面，以便更准确地绘制出上半部分的复杂形状。根据图纸，我们先绘制最上面的半圆槽部分，然后将其与底座精确连接。在确保所有尺寸与图纸相符后，使用“拉伸凸台/基体”功能创建实体。

We will proceed to draw the upper half of the bracket. Firstly, establish an auxiliary reference plane to more accurately draw the complex shape of the upper part. According to the blueprint, we will first draw the top semi-circular groove section, and then precisely connect it to the base. After ensuring that all dimensions match the drawing, use the "Stretch Boss/Base" function to create a solid.