畅享聊：SolidWorks学习（45）

摘要：Share interests, spread happiness, increase knowledge, and leave beautiful!

分享兴趣，传播快乐，增长见闻，留下美好！

亲爱的您，这里是LearningYard新学苑。

今天小编为你带来

畅享聊：SolidWorks学习（45）

欢迎您的访问！

Share interests, spread happiness, increase knowledge, and leave beautiful!

Dear you, this is LearningYard Academy.

Today, the editor brings you

Changxiang Chat:SolidWorks Learning (45)

welcome your visit!

电机是在工程非常常见的一个零部件，我们通过电机能够让我们的模型动起来，从而完成一些特定的任务，所以电机也是相当重要的。那么今天我们来绘制两个电机，第一个是驱动电机，第二个是旋转电机的模型。

Electric motors are a very common component in engineering, and we can use them to make our models move and complete specific tasks. Therefore, electric motors are also quite important. So today we will draw two motors, the first one is the driving motor, and the second one is the model of the rotating motor.

下面就是第一个驱动电机的零件图纸从下面的零件图中，一下可能不能够看出驱动电机的形状，剖面图以及俯视图相结合能够得知大致形状，而我们下面给出了这个零件的三维模型，这个电机的形状比较规整，注重细节按下面步骤完成。

The following is the component drawing of the first drive motor. From the component drawing below, it may not be possible to see the shape of the drive motor. By combining the sectional view and top view, the approximate shape can be obtained. However, we have provided a three-dimensional model of this component. The shape of this motor is relatively regular, and attention to details should be paid to following the steps below.

第二个零件是旋转电机，这个电机的样子我们都比较熟悉，常见的舵机也是旋转电机的一种，从下面的图中可以观察到，这个电机两边的固定孔为是对称的，这了我们可以镜向特征完成。

The second component is a rotary motor, which we are all familiar with. A common servo is also a type of rotary motor. As can be observed from the figure below, the fixing holes on both sides of this motor are symmetrical, which allows us to achieve mirror like features.