履带压料PUR窄板封边|NB771EM高速自动封边机

摘要：NB771EM高速自动封边机全面升级，配备履带压料、双胶锅、双导轨齐头、两组修边、高速四刀仿形和双水平刮边，最高封边速度可达26m/min，轻松应对40mm窄板，实现高品质窄板封边。

履带压料 PUR窄板封边 | NB771EM 高速自动封边机###

NB771EM高速自动封边机全面升级，配备履带压料、双胶锅、双导轨齐头、两组修边、高速四刀仿形和双水平刮边，最高封边速度可达26m/min，轻松应对40mm窄板，实现高品质窄板封边。

NB771EM Auto edge banding machine has been fully upgraded, equipped with track pressing, double glue pot, double guide rail end cutting, two sets of trimming, high-speed corner rounding, and double horizontal scraping.26m/min max., easily for 40mm narrow parts edge banding.

核心亮点

Core Highlights

封边工件规格

Edge banding workpiece specifications

既能应对常规工件封边，也能应对40mm宽的窄板封边，仿形跟踪能稳定达到26m/min，达到无可挑剔的封边效果。

It can handle both conventional workpiece edge banding and 40mm wide narrow plate edge banding. The contour tracking can stably reach 26m/min, achieving impeccable edge banding effect.

重型框架式机架

Heavy-duty frame body

经机器人焊接、自然时效、退火、喷丸，龙门加工中心一次成型等严格工艺，确保稳定性。

Through robot welding, natural aging, annealing, shot peening, gantry processing center one-time molding and other strict processes to ensure stability.

履带压梁

Steel pressure beam

1、履带与板材面接触的方式，压板加工更稳定，工件运行平顺，传输速度快；

The way the V-belt is in contact with the panel surface makes the panle processing more stable, the workpiece runs smoothly and fast;

2、压梁升降采用电动调节，配置数显表。

The lifting of the pressure beam is electrically adjusted and equipped with a digital display.

窄板辅助装置

Row edge feed assistance

具备稳定的支撑结构，提高加工窄板的稳定性和精度。

With stable support structure, it improves the stability and precision of processing narrow parts.

双胶锅

Double glue pot

1. 双胶锅（双色免清洗PUR和快速上熔胶）可同时容纳两种不同颜色或性质的胶水，无需频繁清洗胶锅即可切换胶水类型，节省了停机时间；

The double glue pot (two-color no-clean PUR and fast-melting glue) can hold two glues of different colors or properties at the same time. You can switch the glue type without frequent cleaning of the glue pot, saving time;

2. 上胶锅采用定量出胶和独立储胶设计，支持“即用即熔”，避免胶水反复加热导致的碳化。

The glue pot adopts quantitative glue dispensing and independent glue storage design, which supports "melting immediately after use" and avoids carbonization caused by repeated heating of glue.

双色免清洗PUR Two-color no-clean PUR

1. 双色胶锅可同时容纳两种不同性能或颜色的PUR胶水，通过智能控制系统实现瞬间切换，适应不同板材封边需求；

The two-color glue pot can hold two PUR glues with different properties or colors at the same time, and can be switched instantly through the intelligent control system to meet the edge banding requirements of different boards;

2. 深色板材封边时切换深色胶水避免胶线显色问题，浅色板材则使用透明胶，提升美观度，高强度粘接及环保特性，还解决了传统封边工艺的效率瓶颈与环保隐患。

When banding the edges of dark boards, switch to dark glue to avoid the problem of glue line color, and use transparent glue for light-colored boards to improve the aesthetics, high-strength bonding and environmental protection characteristics, and solve the efficiency bottleneck and environmental risks of traditional edge banding technology.

双导轨快速齐头

Double rails end cutting

通过精密的直线导轨运动，采用靠模自动跟踪和高频高速电机快速切削结构，保证切断面平整光滑。

Through precise linear guide motion, automatic tracking of the mold and high-frequency and high-speed motor fast cutting structure, the cut surface is guaranteed to be smooth.

两组修边

Two sets of cutter

1、粗修采用靠模和高频高速电机，用于修整板材上下多余的封边材料，保证上下部分平整光滑；

The rough trimming uses a template and a high-frequency high-speed motor to trim the excess edge materials on the upper and lower parts of the plate to ensure that the upper and lower parts are flat and smooth;

2、精修采用R修边刀，为板材封边条修出弧度。

Use R trimming tool to trim the edge strip of the board to create a curvature.

高速四刀仿形跟踪

High speed corner rounding

四刀仿形跟踪系统配备四组独立高频电机，同时对板材四角进行仿形修圆角，消除边缘毛刺，使封边接缝圆滑不刺手，可满足26m/min稳定运行，有效提升了封边精度、效率和美观度。

High speed corner rounding system equipped with four independent high-frequency motors, which can simultaneously profile and round the four corners of the plate to eliminate ed.

双水平刮边

Double horizontal scraping

设备配置两组水平刮边，消除修边痕迹，让板边光滑整洁，提升封边美观度。

Equipped with two sets of horizontal scrapers to eliminate trimming marks, make the board edges smooth and tidy, and improve the aesthetics of edge sealing.

浮动平刮

Floating flat scraping

配置浮动平刮，刮落板材与封边带上残留物，保证板材与封边带的平整清洁。

Equipped with floating flat scraper to scrape off the residue on the board and edge banding to ensure the flatness and cleanness of the board and edge banding.

Parameter Overview